620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2015 (95) (entfernen)
Dokumenttyp
- Buch (Monographie) (52)
- Konferenzveröffentlichung (40)
- Wissenschaftlicher Artikel (2)
- Bericht (1)
Schlagworte
- Germany (75)
- Deutschland (73)
- Research report (46)
- Forschungsbericht (45)
- Conference (26)
- Konferenz (26)
- Test (23)
- Versuch (21)
- Measurement (19)
- Bewertung (17)
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
In North America, frontal crash tests in both the regulatory environment and consumer-based safety rating schemes have historically been based on full-width and moderate-overlap (40%) vehicle to barrier impacts. The combination of improved seat-belt technologies, notably belt tensioning and load limiting systems, together with advanced airbags, has proven very effective in providing occupant protection in these crash modes. Recently, however, concern has been raised over the contribution of narrower frontal impacts, involving primarily the vehicle corners, to the incidence of fatality and serious injury as a result of the potential for increased occupant compartment intrusion and performance limitations of current restraint systems. Drawing on data documented in the National Automotive Sampling System (NASS)/ Crashworthiness Data System (CDS) for calendar years 1999 to 2012, the present study examines the characteristics of existing and proposed corner crash test configurations, and the nature of real-world collisions that approximate the test environments. In this analysis, particular emphasis is placed on crash pulse information extracted from vehicle-based event data recorders (EDR's).
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Aufgabe der Studie war eine erstmalige umfassende Erhebung der Ausstattung der Pkw in Deutschland mit Fahrzeugsicherheitssystemen. Dazu wurden 5.070 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt. Für die Befragung wurden 53 Fahrzeugsicherheitssysteme ausgewählt. Darunter sind neue Systeme wie Stauassistenten und Kreuzungsassistenten sowie auch weitgehend etablierte Systeme wie die Fahrdynamikregelung (ESP) und Airbags. Neben den Nutzern wurden auch Experten befragt, die beruflich mit dem Ein- oder Verkauf von Pkw für Unternehmensflotten befasst sind. Diese zehn qualitativen Interviews geben einen Einblick in die Bedeutung verschiedener Kriterien bei der Fahrzeugwahl und speziell den Stellenwert von Fahrzeugsicherheitssystemen. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags, die darauf abzielen, die Folgen eines Unfalls für die Beteiligten abzumildern. Aber auch aktive und intervenierende Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen, gehören häufig zur Fahrzeugausstattung. Die häufigsten Vertreter aus dieser Gruppe sind der Bremsassistent, ESP und der Tempomat. Die meisten Fahrzeugsicherheitssysteme sind in Fahrzeugen der oberen Mittelklasse und Oberklasse zu finden. Mit der jährlichen Fahrleistung und der Nutzungshäufigkeit nimmt die Anzahl der Sicherheitssysteme ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Die Ergebnisse zeigen ein Muster: Sind Systeme insgesamt selten, unterscheiden sich die Anteile innerhalb der verschiedenen Fahrzeugsegmente teilweise erheblich. Neue Systeme sind dann in den Fahrzeugen der oberen Mittelklasse und Oberklasse deutlich häufiger zu finden und in den Minis und Kleinwagen teilweise mit nicht messbaren Anteilen. Die Experteninterviews, die mit Flottenbetreibern und Fahrzeugverkäufern geführt wurden, zeigen, dass solche Fahrzeugsicherheitssysteme in die Standardausstattung aufgenommen werden, deren Nutzen nachgewiesen ist.
Die Dichte des Netzes an Glättemeldeanlagen (GMA) an Bundesautobahnen ist wesentlich höher als im nachgeordneten Netz. Eine Verdichtung des Messstellennetzes analog zu Bundesautobahnen ist jedoch aus finanziellen und organisatorischen Gründen nicht realisierbar. Ziel der Forschungsvorhaben ist daher die vereinfachte Erfassung von winterlichen Fahrbahn- und Witterungszuständen, um eine wesentliche Verdichtung des Messstellennetzes unter wirtschaftlich akzeptablen Bedingungen zu ermöglichen. Hierdurch soll den Winterdienstverantwortlichen eine netzweite Beurteilung des Streckenzustandes ermöglicht werden, um die Winterdiensteinsätze anforderungsgerechter und wirtschaftlicher durchführen zu können. Im Rahmen einer Lebenszykluskostenanalyse wurden Investitions- und Betriebskostendaten von über 200 GMA ausgewertet. Die Analyse ergab durchschnittliche Investitionskosten von 38.300 € je Messstelle. Diese Kosten werden hauptsächlich durch die Art der Stromversorgung (netzgebunden/autark) sowie den Umfang und die Art der Sensorik beeinflusst. Die bei Energieverbrauchsmessungen an bestehenden GMA erfassten Daten zeigen, dass GMA teils stark unterschiedliche Leistungsverbräuche besitzen, eine energieoptimierte Ausstattung jedoch eine wirtschaftlich akzeptable autarke Energieversorgung ermöglicht. Im Winter 2011/2012 wurden in drei Meistereien Einsatzentscheidungen untersucht. GMA sind hierbei die wichtigste Informationsquelle; sie werden in über 60 % aller Entscheidungen herangezogen. Luft- und Fahrbahnoberflächentemperatur sind die wichtigsten Parameter. Große Bedeutung für die Nutzer hat vielfach auch ein Kamerabild. Wesentlich für einen wirtschaftlichen Betrieb von GMA und einen gleichbleibenden Nutzen für die Anwender ist eine hohe Zuverlässigkeit in die angezeigten Messdaten. Daher sollte die Qualitätssicherung bei Installation und laufendem Betrieb größere Bedeutung gewinnen, indem durch die Straßenbauverwaltungen neben der regelmäßigen Wartung und Kalibrierung standardisierte Abnahme- und regelmäßige Kontrollprüfungen auf Grundlage der geltenden technischen Normen vorgesehen werden.