Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (150)
- Buch (Monographie) (69)
- Wissenschaftlicher Artikel (8)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Unfall (229) (entfernen)
Die Erkennung von Sicherheitsdefiziten im Straßennetz erfolgt zurzeit im Wesentlichen im Rahmen der örtlichen Unfalluntersuchungen. Dabei werden überwiegend punktuelle Unfallhäufungen identifiziert und analysiert. Für die Analyse von Straßennetzen wurden mit den "Empfehlungen für die Sicherheitsanalyse von Straßennetzen (ESN)" Verfahren vorgestellt, die für eine netzweite Analyse von Straßen geeignet sind und die Identifikation von Sicherheitsdefiziten in einem größeren Maßstab ermöglichen. Im Rahmen des vorliegenden Projektes wurde eine pilothafte Anwendung der Verfahren nach ESN für das Straßennetz des überörtlichen Verkehrs in Rheinland-Pfalz vorgenommen. Der Fokus der Untersuchung lag auf der Frage, ob und in welchem Umfang mit einer weitestgehend automatisierten Vorgehensweise sowie unter Verwendung der digital verfügbaren Daten eine sinnvolle Anwendung der ESN möglich ist. Die in den Straßendatenbanken geführten Abschnitte erweisen sich jedoch für die Zielsetzung der ESN als zu feingliedrig. Daher wurden vertiefende Untersuchungen zur Abschnittsbildung durchgeführt. Dabei wurden fünf Varianten der Abschnittsbildung betrachtet. Ergänzend zur Abschnittsbildung nach ESN mit mindestens 4 U(SP) pro Abschnitt wurde zusätzlich die zeitliche und räumliche Verteilung der U(P) untersucht. Bei ihrer Verwendung sind insgesamt stabilere Ergebnisse zu erwarten. Der Vergleich der sicherheitspotenziale bei einer Abschnittsbildung nach Netzstruktur mit den Unfallkostenraten von Unfallhäufungslinien zeigt in vielen Fällen Überschneidungen. aufgrund der stabileren Ergebnisse eines längeren Untersuchungszeitraums (1999 bis 2004) wird eine Verlängerung des von den ESN vorgesehenen Untersuchungszeitraums empfohlen. Es ist festzuhalten, dass die ESN-Verfahren eine Vorauswahl von auffälligen Streckenabschnitten liefern, deren Verbesserung zu einer deutlichen Steigerung der Verkehrssicherheit führen könnte. Inwiefern die ermittelten Sicherheitspotenziale tatsächlich durch geeignete Maßnahmen ausgeschöpft werden können, muss durch eine Detailanalyse geprüft werden.
Im vorliegenden Forschungsvorhaben wurden Nutzen und Kosten nicht vollständig signalisierter Knotenpunkte unter besonderer Berücksichtigung der Verkehrssicherheit behandelt. Für sechs ausgewählte Beispielknotenpunkte mit nicht vollständiger Signalisierung wurde der Verkehrsablauf vor Ort beobachtet, in Simulationsmodellen nachgebildet und bei unterschiedlichen Belastungsverhältnissen analysiert. Ein wesentliches Ergebnis der Simulationsuntersuchung war, dass an den Beispielknotenpunkten bei nicht vollständiger Signalisierung der Verkehr bei einer Belastung von bis zu 2.000 Kraftfahrzeuge pro Stunde (Kfz/h) in der Hauptrichtung (Querschnitt) und zwischen 100 Kfz/h bis 300 Kfz/h in der Nebenrichtung mit ausreichender Qualität bedient werden kann. Ein Vergleich mit den Simulationsergebnissen für den unsignalisierten Zustand ergab, dass bei nicht vollständiger Signalisierung der Verkehr deutlich leistungsfähiger abgewickelt werden kann. Durch eine Vollsignalisierung hingegen lassen sich gegenüber der nicht vollständigen Signalisierung in der Regel keine zusätzlichen Kapazitätsreserven mobilisieren. Neben der Verkehrsqualität ist die Verkehrssicherheit das zweite maßgebende Kriterium für die Beurteilung der Knotenpunkte mit nicht vollständiger Signalisierung. Die Verkehrsunfallanalyse erbrachte für die Innerortsknotenpunkte keine Erkenntnisse, die gegen die Einführung einer nicht vollständigen Signalisierung sprechen. Für Außerortsknotenpunkte wird empfohlen, die Untersuchungen zum Thema Verkehrssicherheit auf der Grundlage eines deutlich erweiterten Stichprobenumfangs zu vertiefen. Die nicht vollständige Signalisierung stellt eine kostengünstige Alternative zur Vollsignalisierung dar. Die Investitionskosten für die nicht vollständige Signalisierung liegen bei 35 bis 70 Prozent der Investitionskosten für die Vollsignalisierung. Unter Berücksichtigung der Betriebskosten ergeben sich gegenüber der Vollsignalisierung Einsparungsmöglichkeiten in Höhe von 3.500 - 5.500 Euro/Jahr.
Das Fahrverhalten ändert sich mit zunehmendem Alter. Damit ändern sich auch die Risiken. Neben den jungen Fahranfängern im Alter von 18 bis etwa 25 Jahren stellen Fahrer über 75 Jahre eine besondere Problemgruppe dar. Mit zunehmender Zahl alter Fahrer (demographische Entwicklung plus Zunahme der Fahrerlaubnisinhaber in dieser Altersgruppe) besteht hier in naher Zukunft akuter Handlungsbedarf. Ansatzpunkte gibt es im gesamten Mensch-Maschine-Umwelt-System. Fahrzeuge müssen vermehrt im Hinblick auf alte Fahrer konstruiert und optimiert werden. Die Infrastruktur muss den Bedürfnissen einer eindeutigen Verkehrsführung angepasst werden. Aber nur, wenn der Mensch selbst geeignet ist, als Fahrer am Straßenverkehr teilzunehmen, ist ein Gewinn bei der Verkehrssicherheit zu erwarten. Dies muss gewährleistet werden. Wichtig ist, dass die Problematik der alten Fahrer als solche erkannt wird und schnell eine tragfähige Lösung für die Zukunft gefunden wird.
Straßenbetriebsdienstpersonal unterliegt nicht nur einem im Vergleich zu anderen Berufen stark erhöhten Unfallrisiko, sondern verschiedene Aspekte der Tätigkeit im Straßendienst deuten auch auf eine hohe psychische Belastung der Beschäftigten hin, mit negativen Folgen für Sicherheit, Gesundheit und Wohlbefinden. Bei dem Bemühen, Sicherheit und Gesundheit der Beschäftigten am Arbeitsplatz zu fördern, verlangt der Gesetzgeber daher " zum Beispiel im Arbeitsschutzgesetz (-§ 3-5 ArbSchG) " von betrieblichen Entscheidungsträgern, auch psychische Belastungen zu ermitteln, zu beurteilen und entsprechende Schutzmaßnahmen abzuleiten. So sollen mögliche Gefährdungen der physischen und psychischen Gesundheit vermieden werden. Auf dieser Grundlage wurde das hier beschriebene Forschungsprojekt mit zwei Themenschwerpunkten initiiert: zunächst Erfassung und Analyse der Belastungssituation im Straßenbetrieb und daraus abgeleitet ein Umsetzungskonzept zur Integration des Themas "psychische Belastung" in das betriebliche Arbeits- und Gesundheitsschutz-Management. Zunächst wurde neben Literaturanalysen eine Reihe von halbstrukturierten Interviews mit Experten sowie Führungskräften geführt. In einem weiteren Arbeitsschritt wurde mittels eines Verfahrens zur subjektiven Arbeitsanalyse die Belastungssituation im Straßenbetrieb ermittelt. Die Ergebnisse dieser Arbeitsanalysen, die in zwei unterschiedlich strukturierten Autobahnmeistereien im Bereich der Autobahndirektion Südbayern mit n = 51 Straßenwärtern sowie 5 Straßenmeistern durchgeführt wurden, konnten in nachfolgenden Gruppendiskussionen mit den Mitarbeitern vertieft werden. Zusammenfassend liegen folgende Belastungsschwerpunkte bei Straßenwärtern vor: - Winterdienst, - Unfallgeschehen (Verkehrsunfälle mit Beteiligung von Mitarbeitern), - eher geringer Handlungsspielraum, - hohe Anforderungen an Konzentration und Aufmerksamkeit, - hoher Zeitdruck und hohes Arbeitspensum, - hohe Anforderungen an das Einhalten von Verhaltensvorschriften sowie an Risikoeinschätzung, - zu wenig Erholungszeiten nach Unfällen und im Winterdienst, - schweres Heben und Tragen, - negative Arbeitsumgebungsbedingungen wie Lkw-Verkehr, schnell vorbeifahrende Verkehrsteilnehmer, Lärm, Abgase, sowie Beschimpfungen durch Verkehrsteilnehmer. Die Studie liefert deutliche Hinweise, dass die unmittelbaren Vorgesetzten der Straßenwärter " also die Straßenmeister " in ihrer Schlüsselrolle gesondert zu betrachten sind, sowohl hinsichtlich der besonderen Belastungen als auch der Entwicklung ihrer Führungskompetenz. Zusätzlich wurden auch Verkehrsteilnehmer (n = 120 Pkw-Fahrer) mittels eines Kurzfragebogens an entsprechenden Kontaktplätzen im Umfeld von Bau- und Arbeitsstellen kurzer Dauer (AkD-) unter explorativen Gesichtspunkten befragt. Die Befragungsergebnisse verweisen auf ein insgesamt mangelndes Gefahrenbewusstsein der Verkehrsteilnehmer insbesondere hinsichtlich Geschwindigkeiten und Abständen im Arbeitsstellenbereich. Die gewonnenen Erkenntnisse führten zur Ableitung von Handlungsfeldern. Das Umsetzungskonzept selbst benennt zunächst Maßnahmen auf der Ebene der Gesamtorganisation (zum Beispiel Erarbeitung von Leitlinien, Definition strategischer Ziele, Schaffung von Rahmenbedingungen und Ressourcen zur Umsetzung). Anschließend werden spezifische Module auf der Ebene von Straßenmeistern und Straßenwärtern, wie zum Beispiel Art und Inhalt der Organisations- und Personalentwicklungsmaßnahmen (OE- und PE-Maßnahmen) sowie der Schulungsmaßnahmen beziehungsweise weitere unterstützende Maßnahmen, aufgeführt. Um den beteiligten Stellen sowohl die Aufwandsschätzung zu erleichtern als auch ein praktisches Vorgehen zu demonstrieren, ist abschließend eine Pilotanwendung skizziert. Dies schließt die Auswahl der Beteiligten, die Ausarbeitung und Erprobung ausgewählter Maßnahmen mit abschließender Evaluierung des Pilotversuches sowie die entsprechende Anpassung/Modifikation des Gesamtkonzeptes nach den Erfahrungen des Pilotprojektes mit ein.
Der Beitrag setzt sich mit folgenden Fragestellungen auseinander: 1. Stellen ältere Kraftfahrer ein Sicherheitsrisiko für den Straßenverkehr dar? 2. Wie wurden diese Frage und die "Fahreignung und Fahrtüchtigkeit älterer Kraftfahrer" in den vergangenen 50 Jahren wissenschaftlich bewertet - insbesondere bei Kongressen der Deutschen Gesellschaft für Verkehrsmedizin und den Deutschen Verkehrsgerichtstagen? 3. Wie haben in den vergangenen 50 Jahren Juristen, Behörden und Gesetzgeber die "Fahreignung älterer Kraftfahrer" gesehen und umgesetzt? 4. Werden morbiditäts- und altersbedingte Beeinträchtigungen der Leistungsfähigkeit rechtzeitig und richtig durch ältere Kraftfahrer erkannt? 5. Wie gehen ältere Kraftfahrer mit erkannten Leistungsmängeln um? 6. Benötigen ältere Verkehrsteilnehmer Aufklärung, Beratung, Fortbildung und Vorsorge- oder Kontrolluntersuchungen? Insgesamt kann festgestellt werden, dass allein aus normalem Altersabbau und hohem Alter kein Rückschluss auf die Fahruntauglichkeit gezogen werden kann. Das wichtigste gesellschaftliche Ziel für die Teilnahme älterer Menschen am Straßenverkehr ist - angesichts der demographischen Entwicklung - die Einsichtsfähigkeit in das altersbedingt verminderte Leistungsvermögen und den Veränderungswillen zu Kompensationsmechanismen bei älteren Verkehrsteilnehmern zu schärfen. Der behandelnde Arzt, Angehörige und sonstige Bezugspersonen sollten alles tun, um den bejahrten Kraftfahrer zu motivieren, sich seiner Selbstverantwortung bewusst zu werden und demgemäß zu handeln.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Mit dem Forschungs- und Entwicklungsvorhaben sollten bestehende Wissenslücken zum Verkehrssicherheitspotenzial an innerörtlichen Haltestellen des straßen- und schienengebundenen öffentlichen Personennahverkehrs geschlossen werden. Untersuchungsgegenstand waren Haltestellen im Linienbus- und Straßenbahnverkehr mit Lage im Straßenraum. Neben einer Auswertung der Straßenverkehrsunfallstatistik des Statistischen Bundesamtes erfolgten vertiefende Unfallanalysen in vier Fallbeispielen (Städte Düsseldorf, Leipzig und Zwickau sowie Landkreis Mayen-Koblenz) als Grundlage für ein Sicherheitsranking relevanter Haltestellentypen, ergänzt um Einzelfallanalysen für ausgewählte Haltestellenbereiche unterschiedlichen Typs. Die Untersuchungen erfolgten jeweils auf der Basis von Unfalldaten aus drei Kalenderjahren. Insgesamt wurden in den vier Fallbeispielen rund 2.550 Teilhaltestellen unterschiedlichen Typs untersucht, davon 1.750 Bushaltestellen, 690 Straßenbahnhaltestellen und 110 kombiniert genutzte Haltestellen. In den Haltestellenbereichen waren in 3 Kalenderjahren rund 770 Unfälle mit Personenschaden zu verzeichnen. Rund 85 Prozent (im Landkreis Mayen-Koblenz 91 Prozent) der Bushaltestellen und 30 Prozent der Straßenbahnhaltestellen wiesen in den untersuchten drei Kalenderjahren keinen Unfall mit Personenschaden auf. Als spezifische Kenngröße für die vergleichende Beurteilung der unterschiedlichen Haltestellenformen wurden haltestellenbezogene Unfallkosten UK zugrunde gelegt, um über die Unfallanzahl hinaus auch die Unfallschwere in die Betrachtungen einzubeziehen. Im vorliegenden Falle wurde diese Kenngröße als UK(P) ermittelt, da nur Unfälle mit Personenschäden in die Untersuchungen einbezogen wurden. Verwendet wurden an die Verunglücktenstruktur angepasste Unfallkostensätze. Quantifizierte Ergebnisse konnten für die Bushaltestellentypen "Bucht" und "Fahrbahnrand/Kap" sowie die Straßenbahnhaltestellentypen "Fahrbahnrand/Kap", "Fahrbahn" (mit den Varianten "StVO" und "Zeitinsel") sowie "Seitenbahnsteig" ermittelt werden. Zusammenfassend konnte festgestellt werden: - Im Vergleich der ÖPNV-Teilsysteme sind Bushaltestellen sicherer als Straßenbahnhaltestellen und kombinierte Haltestellen. - Im Vergleich der Haltestellentypen sind Haltestellen am Fahrbahnrand (einschließlich Kaplösungen) am sichersten, gefolgt vom Typ "Bucht" und den beiden auf das ÖPNV-Teilsystem Straßenbahn bezogenen Haltestellentypen "Fahrbahn" und "Seitenbahnsteig". - Bezogen auf das ÖPNV-Teilsystem Bus schneidet der Haltestellentyp "Bucht" deutlich ungünstiger ab als der Typ "Fahrbahnrand/ Kap". - Bezogen auf das ÖPNV-Teilsystem Straßenbahn schneidet der Haltestellentyp "Fahrbahnrand/Kap" am günstigsten ab, gefolgt vom Typ "Fahrbahn". Am ungünstigsten sind die Werte für den Typ "Seitenbahnsteig". - In Bezug auf den Straßenbahnhaltestellentyp "Fahrbahn" ergaben die Ergebnisse zu den beiden Varianten "Fahrbahn, StVO" und "Fahrbahn, Zeitinsel" deutliche Unterschiede. Sowohl bei den spezifischen Unfallkosten als auch in Bezug auf die mittlere jährliche Unfallanzahl pro Teilhaltestelle und die mittleren Unfallkosten von Unfällen mit Personenschaden im Haltestellenbereich ergab die Variante "Zeitinsel" ungünstigere Werte als die Variante "StVO". Empfohlen wird insbesondere: - die Priorisierung des Typs "Fahrbahnrand/Kap" als Standardlösung für Bushaltestellen (VwV-StVO), - eine Neubewertung des Typs "Fahrbahn" und hier wiederum der Variante "StVO" in VwV-StVO und Regelwerken mit dem Ziel einer Priorisierung dieses Typs gegenüber dem Typ "Seitenbahnsteig" (bei vergleichbaren Rahmenbedingungen) sowie der Variante "StVO" gegenüber der Variante "Zeitinsel", die Konkretisierung und Weiterentwicklung der Einsatzkriterien für Zeitinseln sowie - eine verstärkte Berücksichtigung der Verkehrssicherheit von im Haltestellenbereich die Fahrbahn querenden Fußgängern.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
Annually within the European Union, there are over 50,000 road accident fatalities and 2 million other casualties, of which the majority are either the occupants of cars or other road users in collision with a car. The European Commission now has competency for vehicle-based injury countermeasures through the Whole Vehicle Type Approval system. As a result, the Commission has recognised that casualty reduction strategies must be based on a full understanding of the real-world need under European conditions and that the effectiveness of vehicle countermeasures must be properly evaluated. The PENDANT study commenced in January 2003 in order to explore the possibility of developing a co-ordinated set of targeted, in-depth crash data resources to support European Union vehicle and road safety policy. Three main work activity areas (Work Packages) commenced to provide these resources. This paper describes some of the outcomes of Work Package 2 (WP2, In-depth Crash Investigations and Data Analysis). In WP2, some 1,100 investigations of crashes involving injured car occupants were conducted in eight EU countries to a common protocol based on that developed in the STAIRS programme. This paper describes the purposes, methodology and results of WP2. It is expected that the results will be used as a co-ordinated system to inform European vehicle safety policy in a systematic, integrated manner. Furthermore, the results of the data analyses will be exploited further to provide new directions to develop injury countermeasures and regulations.
Ziel des vorliegenden Forschungsprojekts war die Quantifizierung von staubedingten Reisezeitverlusten im Jahr 2000, die auf infrastrukturbedingte Kapazitätsengpässe einschließlich Verkehrsunfällen und Pannen zurückzuführen sind. Zusammen mit den Ergebnissen der "Quantifizierung staubedingter Reisezeitverluste auf Autobahnen - Störungsursache: Arbeitsstellen" konnte Aufschluss darüber gegeben werden, wie sich die Reisezeitverluste auf Bundesautobahnen anteilsmäßig und in ihrer Größenordnung auf die genannten Störungsursachen aufteilen. Hierzu wurden im ersten Teil der Arbeit methodisch folgende Aspekte behandelt: - Aufbau eines Autobahnnetzmodells; - Modellierung der Verkehrsnachfrage; - Modellierung der Kapazität; - Staumodellierung und Ermittlung der Reisezeitverluste. Im zweiten Teil der Arbeit wurden die Ergebnisse der Verlustzeitberechnung für das Bezugsjahr 2000 ausführlich dokumentiert. In Sensitivitätsanalysen wurde die Stabilität der Berechnungsergebnisse hinsichtlich der Veränderung einzelner Eingangsdaten bestimmt. Dabei kommt der Modellierung der Verlagerung der Verkehrsnachfrage bei vorhandener Überlastung eine herausragende Bedeutung zu. Ohne Berücksichtigung dieser Verlagerung werden unplausible Werte berechnet, wobei die ermittelten Reisezeitverluste um ein Vielfaches höher als mit Berücksichtigung dieses Effekts liegen. Da zum Ausmaß der Verlagerung bislang keine Untersuchungen vorliegen, ist die Modellierung an dieser Stelle mit großen Unsicherheiten behaftet. In einer Gesamtbetrachtung wurden staubedingte Zeitverluste im Autobahnnetz für das Bezugsjahr 2000 zu insgesamt 234 Millionen Stunden und mit folgenden Anteilen abgeschätzt: Infrastrukturbedingte Engpässe 39%, Unfälle und Nothalte 26%, Arbeitsstellen 35%.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
76 severe traffic accidents had been investigated in depth in an ongoing Volkswagen-Tongji University joint accident research project in JiaDing district, Shanghai, PR China since June 2005. With a methodology similar to German accident research units in Dresden and Hannover, a research team proceeds to the scene immediately after the incident to investigate and collect various data on environment, accident occurrence, vehicle state and deformations as well as injuries. The data combined with the results of accident reconstruction will be stored in a database for further statistical and casuistic analysis. The first outcome of the project supports the hypothesis that a main causation for the large number of traffic accidents in China is the lacking of risk awareness in Chinese driver behaviour. Low seat-belt use and the high proportion of vulnerable and poorly protected two-wheelers in traffic are reasons for the high injury and fatality rate in China. The research work shows that accident research in China is feasible and able to give support to tackle one of the urging problems in Chinese development.
Im Rahmen des Projektes sollte ein Hilfsmittel für Planer entwickelt werden, mit dem zum einen schon in der Planungsphase potenziell kritische Streckenabschnitte für Motorradfahrer identifiziert werden und zum anderen passende Maßnahmen zum Schutz der Motorradfahrer ausgewählt werden können. Hierzu galt es Kriterien zu analysieren, die an Streckenabschnitten ein erhöhtes Unfallpotenzial für Motorradfahrer darstellen. Für diese Analyse konnte auf die Daten des digitalen Straßennetzes sowie der digitalen Unfalldatei des Landes Rheinland-Pfalz zurückgegriffen werden. Mit den Daten wurden drei verschiedenen Auswertungen durchgeführt: 1) Alle Unfälle mit Motorradbeteiligung sind einer allgemeinen Auswertung unterzogen worden. Dabei wurden nur die Kriterien analysiert, die bei der polizeilichen Unfallaufnahme erfasst werden. 2) Als nächstes wurden die fahrbahngeometrischen Gegebenheiten an der Unfallstelle und in definierten Bereichen davor untersucht. Dies mit dem Ziel, einen Zusammenhang zwischen dem Streckenverlauf vor der Unfallstelle und dem Ort des Unfallgeschehens herzuleiten. 3) Als letztes wurden die Daten für die Streckenabschnitte in denen sich die Unfälle ereignet haben analysiert und mit Vergleichsdaten von Strecken ohne Unfallauffälligkeiten verglichen. Diese Vergleichsuntersuchung lieferte die wesentlichen Ergebnisse des Projektes. Es konnte abgeleitet werden, dass Streckenabschnitte, welche: a) eine Kurvigkeit über den gesamten Abschnitt > 200 gon/km und b) maximal 15 Änderungen des Streckenverlaufs pro km und c) einen Geradenanteil von maximal 50% und d) eine Länge von über 2,0 km aufweisen, ein besonders erhöhtes Risikopotenzial für Motorradfahrer im Vergleich zum durchschnittlichen Gefährdungspotenzial der Vergleichsstrecken in sich bergen. Basierend auf den Ergebnissen wurde für Planer eine Vorgehensweise entwickelt, mit der das Unfallpotenzial eines Streckenabschnittes bewertet werden kann und darauf aufbauend anhand von verschiedenen Auswahlkriterien Maßnahmen zum Schutz der Motorradfahrer gewählt werden können.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
The "Seven Steps Method" is an analysis and classification system, which describes the human participation factors and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. By means of the "seven steps" it is possible to describe the relevant human causes of accidents from persons involved in the accident in an economic way with a sufficient degree of exactitude, because the causes can be further differentiated in their value (e.g. diversion as external diversion with regard to impact due to surroundings) and their sub values (e.g. external diversion with regard to impact due to surroundings in the shape of a "capture" of the perception by a prominent object of the traffic environment). Theoretically it is possible that one or more causing moments can be assigned to a person involved in an accident in each of the "seven steps"; however it is also possible to sufficiently clarify the cause in only one level (examples for this are described). In the practice of accident investigation at the site of the accident, the sequence chart is also relevant. With its assistance the questioning of the people involved in an accident can be accomplished in a structured way by assigning a set of questions to each step.
In recent years special attention has been paid to reducing the number of fatalities resulting from road traffic accidents. The ambitious target to cut in half the number of road users who are killed each year by 2010 compared with the 2001 figures, as set out in the European White Paper "European Transport Policy for 2010: Time to Decide" implies a general approach covering all kinds of road users. Much has been achieved, e.g. in relation to the safety of car passengers and pedestrians but PTW accidents still represent a significant proportion of fatal road accidents. More than 6,000 motorcyclists die annually on European roads which amounts to 16% of the EU-15 road fatalities. The European Commission therefore launched in 2004 a Sub- Project dealing with motorcycle accidents within an Integrated Project called APROSYS (Advanced PROtection SYStems) forming part of the 6th Framework Programme. In a first step, the combined national statistical data collections of Germany, Italy, the Netherlands and Spain were analysed. Amongst other things parameters like accident location, road conditions, road alignment and injury severity have been explored. The main focus of the analysis was on serious and fatal motorcycle accidents and the results showed similar trends in all four countries. From these results 7 accident scenarios were selected for further investigation via such in-depth databases as the DEKRA database, the GIDAS 2002 database, the COST 327 database and the Dutch element of the MAIDS database. Three tasks, namely the study of PTW collisions with passenger cars, PTW accidents involving road infrastructure features, and motorcyclist protective devices have been assessed and these will concentrate inter alia on accident causes, rider kinematics and injury patterns. A detailed literature review together with the findings of the in-depths database analysis is presented in the paper. Conclusions are drawn and the further stages of the project are highlighted.
In Germany, in-depth accident investigations are carried out in the Hannover area since 1973. In 1999 a second region was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for these surveys. Compared to many other countries, the sample sizes of the GIDAS surveys are much larger. The goal is to collect 1.000 accidents involving personal injuries per year and region. Data collection takes place by using a sampling procedure, which can be interpreted as a two-stage process with time intervals as primary units and accidents as secondary units. An important question is, to what extend these samples are representative for the target population from which they are drawn. Analyses show, for example, that accidents with persons killed or seriously injured are overrepresented in the samples compared to accidents with slightly injured persons. This means, that these data are subject to biases due to uncontrolled variation of sample inclusion probability. Therefore, appropriate weighting and expansion methods have to be applied in order to adjust or correct for these biases. The contribution describes the statistical and methodological principles underlying the GIDAS surveys with respect to sampling procedure, data collection and expansion. In addition, some suggestions regarding potential improvements of study design are made from a methodological point of view.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
This study aimed to identify the occurrence, type and mechanisms of the traumatic injuries of the vulnerable road users in vehicle collisions, and to determine the effects of human, engineering, and environment factors on traffic accidents and injuries. The pedestrian accident cases were collected in the years 2000 to 2005 from Changsha Wujing hospital China and Accident Research Unit at Medical University Hannover in Germany. A statistic analysis was carried out using the collected accident data. The results from analysis of Changsha data were compared with results from analysis of GIDAS data Hannover. The injury severities were determined using AIS code and ISS values. The results were presented in terms of cause of injuries, injury distributions, injury patterns, injury severity. The factors influenced the injury outcomes were proposed and discussed for the vehicle transport environment and road users. The results were discussed with regard to accident data collection, accident sampling and injury distributions etc. In the urban area of Changsha, motorcycles and passenger cars are most frequently involved in vehicle pedestrian accidents. Head and lower extremities injuries are the predominant types of pedestrian injuries. The pedestrian accidents were identified as vital issue in urban traffic safety and therefore a high priority should be given to this road user group in research of safe urban transportation. In Hannover area, cars are most frequently involved in traffic accidents, injured pedestrians are involved in road traffic of Germany in 13% of all causalities only in 2005 and have nearly the same number as motorcyclists, but the half of bicyclists.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Validation of human pedestrian models using laboratory data as well as accident reconstruction
(2007)
Human pedestrian models have been developed and improved continually. This paper shows the latest stage in development and validation of the multibody pedestrian model released with MADYMO. The biofidelity of the multibody pedestrian model has been verified using a range of full pedestrian-vehicle impact tests with a large range in body sizes (16 male, 2 female, standing height 160-192cm, weight 53.5-90kg). The simulation results were objectively correlated to experimental data. Overall, the model predicted the measured response well. In particular the head impact locations were accurately predicted, indicated by global correlation scores over 90%. The correlation score for the bumper forces and accelerations of various body parts was lower (47-64%), which was largely attributed to the limited information available on the vehicle contact characteristics (stiffness, damping, deformation). Also, the effects of the large range in published leg fracture tolerances on the predicted risk to leg fracture by the pedestrian model were evaluated and compared with experimental results. The validated mid-size male model was scaled to a range of body sizes, including children and a female. Typical applications for the pedestrian models are trend studies to evaluate vehicle front ends and accident reconstructions. Results obtained in several studies show that the pedestrian models match pedestrian throw distances and impact locations observed in real accidents. Larger sets of well documented cases can be used to further validate the models especially for specific populations as for instance children. In addition, these cases will be needed to evaluate the injury predictive capability of human models. Ongoing developments include a so-called facet pedestrian model with a more accurate geometry description and a more humanlike spine and neck and a full FE model allowing more detailed injury analysis.
NASS: the glass is half full
(2007)
The National Accident Sampling System (NASS) was born in the late 1970s. It was based on a substantial amount of experience and analysis of what was needed in the United States to understand the safety challenges of our highways. This work also showed how to collect high quality and useful crash data efficiently. Unfortunately, when Ronald Reagan - a President who believed in limited government - was elected, any hope of full funding for NASS was lost. The concept of 75 teams investigating about 18,000 serious crashes in detail annually was never realized. The system got up to 50 teams, then was cut to 36, and finally to 24 teams investigating fewer than a quarter of the originally anticipated number of crashes per year. Despite this, the NASS investigations provide a rich source of data, collected according to a sophisticated statistical sampling system to facilitate detailed national estimates of road casualties on our nation- highways and their causes. In addition, changes have been made in recent years to increase the number of more serious crashes of recent model vehicles to make the results more relevant to improving vehicle safety. A recent, detailed examination of hundreds of rollovers has provided considerable insight into rollover casualties and into what can be done to reduce them. Some of these results will be presented that show the value of the NASS system. Our experience with NASS and the Fatal Accident Reporting System (FARS) suggests a number of improvements that could be made in the United States" crash data systems. It also provides justification for a doubling or tripling of our national expenditures on crash data collection.
The European Union has set a target to reduce all road fatalities (over 40,000) with 50% in 2010. This target percentage remained unchanged with the introduction of the ten new member states within the EU as by May 1st, 2004. According to Eurostat, 34% of all fatalities in 1998 in the, then, fifteen states of the European Union were the result of single vehicle collisions. This represents over 14,000 lives lost each year of which many can likely be saved through better roadside infrastructure design. The challenge for road safety professionals is to find methods and design strategies that help to reduce these casualties. Procedures for full-scale vehicle crash testing of guard rails were first published in the US in 1962. Present European regulation is mainly based on these procedures and later developments. Since then the vehicle fleet has changed considerably. Due to the complexity of the actual safety problem the numerical simulation approach offers a good opportunity to evaluate the different parameters involved in road safety, such as infrastructure properties, vehicle type, vehicle occupants and injuries. The ideal situation would be that simulation tools are coupled or integrated and all involved effects would be related. At the moment this is not the case yet, but initiatives are taken and a new virtual era has started. This paper offers a method looking at two components that encompass the driving environment: the car and the guardrail. As part of the EC-funded project, RISER (Roadside Infrastructure for Safer European Roads) a multi body simulation program study is carried out to determine sensitivities of some parameters in car to guardrail collisions and gives insides in performance of the car with passive safety equipment, the guardrail and the interaction of these objects with each other. By offering a set of methods that includes these two aspects and their intertwining relations, more confidence can be gained in actually reducing fatalities due to single vehicle collisions with, or due to, roadside furniture. Reducing the number of fatalities of single vehicle crashes would contribute greatly to the stated goal of reducing casualties altogether.
Due to recent years accident avoidance and crashworthiness on Austrian roads were mostly developed on national statistics and on-scene investigation respectively. Identification and elimination of black spots were main targets. In fact many fatal accidents do not occur on such black spots and black-spot investigation has reached a limit. New methods are required and therefore the Austrian Road Safety Programme was introduced by the Austrian Ministry of Transport, Innovation and Technology. The primary objective is the reduction of fatalities and severe injuries. Graz University of Technology initiated the project ZEDATU (Zentrale Datenbank tödlicher Unfälle) with the goal to identify similarities in different accident configurations. A matrix was established which categorizes risk and key factors of participating parties. Based on this information countermeasures were worked out.
Der vorliegende Bericht beinhaltet die Ergebnisse zur Inländerfahrleistung 2002, das heißt zur Fahrleistung 2002, welche die in Deutschland zugelassenen Kraftfahrzeuge im In- und Ausland erbracht haben. Mit der Fahrleistungserhebung 2002 liegt erstmals wieder seit 1993 für Deutschland detailliertes statistisches Datenmaterial zur Fahrleistung von Kraftfahrzeugen vor. Auf der Basis von unter-schiedlichen Erhebungen (Halterbefragung, Erhebung zum grenzüberschreitenden Verkehr) wurden Eckwerte und Strukturgliederungen der Kfz-Fahrleistung empirisch ermittelt. In die Halterbefragung wurden im Jahr 2002 rund 127.000 Fahrzeughalter einbezogen, die nach einem stichprobentheoretischen Verfahren aus der Bestandsdatei des Kraftfahrt-Bundesamtes ausgewählt wurden. Die Antwortquote lag insgesamt bei etwa 70 %. Die Inländerfahrleistung betrug im Jahr 2002 (1993) bei einem Kfz-Bestand (inkl. der mit Versicherungskennzeichen) von 53,5 Mio. (45,4 Mio.) rund 703 Mrd. km (631 Mrd. km). Etwa 85 % der Gesamtfahrleistung, dies sind 598 Mrd. km, entfielen 2002 auf Pkw und 11 % auf Lkw und Zugmaschinen. Für Personenkraftwagen wurde 2002 eine durchschnittliche Fahrleistung von rund 13.400 km je Pkw ermittelt. Im Vergleich zu 1993 bedeutet dies einen Rückgang von 5,6 %, für Pkw privater Halter sogar 6,4 %. Die durchschnittliche Jahresfahrleistung von Pkw hängt von einer Vielzahl von Einflussfaktoren ab. Sie sinkt mit dem Fahrzeugalter, steigt mit der Fahrzeuggröße (Hubraum), und ist bei Dieselfahrzeugen höher als bei Fahrzeugen mit Ottomotor. Unter Konstanthaltung der Flottenstrukturen ergibt sich rechnerisch ein Rückgang der durchschnittlichen Fahrleistung von Pkw privater Halter von 8,7 % im Jahr 2002 gegenüber 1993. Dies kann in erster Linie als Folge geänderten Verhaltens interpretiert werden. Aufgrund der ebenfalls veränderten Flottenstruktur nahm, wie erwähnt, die durchschnittliche Fahrleistung von Pkw privater Halter tatsächlich jedoch nur um 6,4 % ab. Insgesamt ist also eine um gut 2 %-Punkte geringere Abnahme der mittleren Fahrleistung eingetreten, als man aufgrund der Verhaltensänderung der Pkw-Nutzer erwarten konnte. Für die gut 2,6 Mio. Lkw wurde eine durchschnittliche Fahrleistung von 22.900 km ermittelt. Wesentlich höher liegt die mittlere Fahrleistung mit 73.700 km bei den 225.000 in die Erhebung einbezogenen Zugmaschinen sowie mit 49.400 km bei den 85.400 Kraftomnibussen. Erstmals konnten auch Kfz mit Versicherungskennzeichen direkt mit ein-bezogen werden. Mit durchschnittlich 2.500 km pro Jahr weisen diese 1,5 Mio. Fahrzeuge erwartungsgemäß die geringste Fahrleistung auf. Die Inlandsfahrleistung, das heißt die Fahrleistung deutscher und ausländischer Fahrzeuge im Inland, sowie das Unfallrisiko sind Gegenstand eines gesonderten Berichts
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
Immer wieder kommt es bei Arbeitsstellen kürzerer Dauer zu Auffahrunfällen auf die fahrbare Absperrtafel, häufig verursacht durch den Schwerverkehr. Unfallursachen sind oftmals Unachtsamkeit oder Übermüdung der Fahrer. Deshalb ist es erforderlich, geeignete Sicherungsmaßnahmen zu suchen, die sowohl einen flüssigen und sicheren Verkehrsablauf gewährleisten als auch das Risikopotenzial für die Arbeitskräfte durch Vermeidung von Unfällen deutlich verringern. Einen vielversprechenden Ansatz stellen die in den Niederlanden eingesetzten Warnschwellen dar, die 150 m vor der fahrbaren Absperrtafel verlegt werden, wodurch unachtsame Fahrer beim Überfahren mechanisch gewarnt werden. Deshalb wurde der Einsatz von Warnschwellen bei Arbeitsstellen kürzerer Dauer auf Bundesautobahnen im Rahmen von Pilotversuchen in Nordrhein-Westfalen und Rheinland-Pfalz praktisch erprobt. Auf Grund der gewonnenen Erkenntnisse wird uneingeschränkt bei allen stationären Arbeitsstellen kürzerer Dauer auf dem Seitenstreifen sowie auch für stationäre Arbeitsstellen kürzerer Dauer auf zweistreifigen Richtungsfahrbahnen mit Sperrung eines Fahrstreifens empfohlen, Warnschwellen einzusetzen.
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
Motorcycle riders are one of the most vulnerable road users. Annually, on estimate 6000 people are killed in motorcycle accidents in the former 15 EU countries. The objective of this research was to investigate and analyze the main aspects and causes of this vulnerability and the accidents in general. For this aim around 70 accidents in The Netherlands were investigated in the framework of an international research program (MAIDS). Also a control group of motorcycles with riders was investigated so that exposure could be taken into account. An important result is that human failure is in 82% of the cases the main cause of the accident, in 52% this is due the other vehicle driver. Perception and decision failures are the most common failures. The most injuries are caused by the environment but they are typically only less severe (AIS1). Injuries caused by the car (front and side) are typically severe injuries (AIS4+). Previous convictions of the MC rider seem to be related to the chance to get involved in an accident. It was shown that the Dutch and the total MAIDS accident sample are comparable.
Traffic accidents were ranked the third among the major causes of death in Thailand. About 13,438 deaths and the death rate from traffic accident was 21.5 per 100,000 of population in 2002. The deaths and death rate varied upon the economic situation. After the economic crisis, traffic accidents were increased as well as the period of the bubble economy. In the Central region of Thailand numbers of road traffic crashes were lower than Bangkok Metropolis, but the highest in the number of deaths, death rate and serious injuries in 2002. Men aged 15"29 years old had higher numbers of deaths than men in other age groups and higher than women. Deaths and injuries from road traffic crashes were the highest in April and January, because there was a long weekend in those months. About 80 percent of road traffic crashes were caused by private car and motorcycle. In 2000 about 51 percent of traffic accidents took place on the straight way, followed by the junction and curves. In 2002, about 97 percent of road traffic crashes were caused by human factors including improper passing, speeding and disregarding to traffic signal, however, the identification of causes of traffic accident needed to improve. Drunk driving, disregarding on safety equipment usage, inefficiency of law enforcement and discontinuing of road safety programs were the deepest causes of traffic accidents. Research based information, a broad coalition of stakeholder and urban planning policy were needed to incorporate for a comprehensive road safety policy formulation and actions.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn
An die Lichtsignalsteuerung richten sich hohe Qualitätsanforderungen, da ihr für einen sicheren und flüssigen Verkehrsablauf im Straßennetz eine wichtige Rolle zukommt. Um eine hohe Qualität der Lichtsignalsteuerung auch im wachsenden Altbestand von Anlagen zu gewährleisten, liegt es nahe, eine regelmäßige, systematische Überprüfung vorzunehmen, um Mängel frühzeitig erkennen und beheben zu können. Ziel des Forschungsvorhabens war es, eine aufwandsoptimierte Verfahrensweise und die notwendigen Hilfsmittel für ein systematisches Qualitätsmanagement für Lichtsignalanlagen (LSA) zu entwickeln. Hierzu wurde zunächst die Lichtsignalsteuerung als Gegenstand des Qualitätsmanagements eingehend erörtert. Auf dieser Grundlage wurden Verfahrensweisen und EDV-gestützte Hilfsmittel entwickelt, mit denen die Güte des Verkehrsablaufs und die Verkehrssicherheit im Straßennetz und an einzelnen Knotenpunkten mit geringem Aufwand überprüft werden kann. Zur Qualitätsbewertung werden Unfalldaten, Prozessdaten und Betriebsdaten analysiert sowie der Verkehrsablauf vor Ort beobachtet. Der Aufbau einer Wissensbasis diente dazu, den Kenntnisstand zu Möglichkeiten der Qualitätsverbesserung an Lichtsignalanlagen für die Anwendung verfügbar zu machen. Hierin sind typische Qualitätsmaengel an Lichtsignalanlagen mit Möglichkeiten der Abhilfe verknüpft. Ferner sind Prüfbedingungen der Eignung und Umsetzbarkeit der Maßnahmen hinterlegt. Mit Hilfe dieses Expertensystems können Maßnahmen identifiziert und bewertet werden. Die Anwendung des Verfahrens an verschiedenen Knotenpunkten zeigt, dass der systematische und modulare Aufbau gut geeignet ist, aussagekräftige Informationen zur Qualität der Lichtsignalsteuerung zu erlangen und geeignete Maßnahmen zur Qualitätsverbesserung zu identifizieren. Das Verfahren kann mit geringem Aufwand durchgeführt werden und kann daher einen Beitrag für die verbreitete Anwendung des Qualitätsmanagements für Lichtsignalanlagen leisten.
The data situation for quantifying the proportion of accidents avoided by the introduction of active safety systems is incomplete, since there is generally no data available on the accidents avoided by the technology in question. In this paper, a split-register approach is suggested and compared with the classical case-control approach known from epidemiologic applications. Provided a set of assumptions hold, which can reasonably be made in such data situations, the split register approach allows inferences on the population accident risk. For both approaches the benefits of basing the analysis on the results of a logistic regression to adjust for confounding factors are outlined. The biasing effects of violating key assumptions are discussed and the split-register approach is demonstrated using the example of the active safety system ESP with data from the German in-depth accident study GIDAS.
Innerörtliche Knotenpunkte zählen zu den Hauptgefahrenstellen für den Radverkehr. Insbesondere größere lichtsignalgesteuerte Knotenpunkte weisen oft Sicherheitsdefizite auf. Planungsstandard ist seit langem die Anlage von Radfahrstreifen zum Beispiel zur Führung direkt links abbiegender Radfahrer oder die Markierung von Furten und Aufstellbereichen zur Führung der indirekt abbiegenden Radfahrer. Zunehmend kommen aber auch andere markierungstechnische Maß-nahmen zur Anwendung. Es zählen hierzu die Anlage von Schutzstreifen für den Radverkehr sowie die Markierung von aufgeweiteten Radaufstellstreifen (ARAS). Die Untersuchung widmet sich vor allem diesen neueren markierungstechnischen Lösungen. Den Ausgangspunkt der Untersuchung bilden eine Erläuterung der Gesamtsystematik der Radverkehrsführung an innerörtlichen Knotenpunkten sowie der wesentlichen in den Regelwerken verankerten Planungsprinzipien. Es folgt eine Zusammenstellung der in der Literatur verzeichneten markierungstechnischen Radverkehrsführungen unter Einbeziehung ausländischer Literatur. Eine breit angelegte Dokumentation verdeutlicht das derzeit realisierte Maßnahmenspektrum Aus diesem Kollektiv werden 50 Knotenpunkte für radverkehrsbezogene Unfallanalysen ausgewählt. In vertiefende Untersuchungen des Verkehrsverhaltens und des Verkehrsablaufs wurden 34 Fallbeispiele aus 14 Städten einbezogen. Hauptuntersuchungspunkte sind das Annäherungsverhalten von Radfahrern an den Knotenpunkt sowie das Aufstell- und das Anfahrverhalten, dies jeweils in Verknüpfung mit den Bewegungsvorgängen des Kraftfahrzeugverkehrs. Insgesamt wurden über 6.000 Radfahrer in die Verkehrsverhaltensbeobachtungen einbezogen. Die Untersuchung macht deutlich, dass es mit den untersuchten markierungstechnischen Maßnahmen bei entsprechender Ausgestaltung möglich ist, den Radfahrern in Knotenpunkten eine akzeptable Führung anzubieten. Die Arbeit benennt die Einsatzbedingungen und gibt Hinweise zur Ausgestaltung der Markierungslösungen. Der Originalbericht enthält als Anhang insgesamt 34 Untersuchungsfallbeispiele aus 14 deutschen Städten. Sie enthalten neben Fotos und grafischen Darstellungen der Knotenzufahrten, der Radverkehrsführung, der LSA - Regelung, des Straßentyps und des Umfeldes sowie die durchgeführten Beobachtungen und Beobachtungsschwerpunkte und eine Erfassung der Verkehrsbelastungen. Auf die Wiedergabe dieses Anhanges wurde in der vorliegenden Veröffentlichung verzichtet. Er liegt bei der Bundesanstalt für Straßenwesen vor und ist dort einsehbar. Verweise auf diesen Anhang wurden zur Information des Lesers im Berichtstext beibehalten.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
Optimierung der Fahrerlaubnisprüfung : Ein Reformvorschlag für die theoretische Fahrerlaubnisprüfung
(2005)
Der vorliegende Bericht enthält konzeptionelle Vorschläge, wie es künftig unter Einbeziehung moderner Multimediatechnik bei der theoretischen Fahrerlaubnisprüfung besser gelingen soll, Fahrerlaubnisbewerber ohne ausreichende Befähigung zum Führen von Kraftfahrzeugen zu erkennen. Dafür wurden zunächst der einschlägige prüfungstheoretische Wissensstand aufgearbeitet und Gütekriterien für ein neues Prüfungssystem dargestellt. Weiterhin wurden in einer Reihe von europäischen Ländern Recherchen über Innovationen im Prüfungswesen durchgeführt; diesbezügliche Erfahrungen sind in das vorliegende Prüfungskonzept eingeflossen. Die gegenwärtige Praxis der theoretischen Fahrerlaubnisprüfung erscheint aus heutiger Sicht unter inhaltlichen und methodischen Gesichtspunkten als unbefriedigend. Die Kritik am derzeitigen Prüfungssystem lässt sich auch durch die Verwendung von transponierten computergestützten Versionen der bisherigen Prüfbogen nicht beheben. Deshalb wurden im vorliegenden Prüfungskonzept die Systematik und die Merkmale eines grundsätzlich neuen computergestützten Prüfungssystems dargestellt. Weiterhin wurden die zu erwartenden Prüfungsabläufe sowie die rechtlichen, technischen und organisatorischen Bedingungen für die Einführung dieses Systems einschließlich eines begrenzten Vorlaufprojekts skizziert. Um die wissenschaftliche Reflexion der methodischen Qualität des Prüfungssystems zu sichern, wurden auch Vorschläge für die Evaluation der neuen theoretischen Fahrerlaubnisprüfung entwickelt. Die Einführung des vorgeschlagenen Prüfungskonzepts lässt neben weiteren Vorzügen drei wesentliche Verbesserungen im deutschen Prüfungssystem erwarten: Eine engere Verbindung des Ausbildungsund Prüfungssystems soll die Lernmotivation der Fahrerlaubnisbewerber steigern, eine bessere Visualisierung der Prüfungsaufgaben wird die Ähnlichkeit der Prüfungsanforderungen mit realen Verkehrsanforderungen verbessern, und es wird ermöglicht, nicht nur die Qualität der Prüfungsaufgaben an sich zu analysieren, sondern auch die Vorhersagekraft der Prüfungsergebnisse für die spätere Unfall- und Delinquenzbelastung der Fahranfänger im Straßen-verkehr. Der Bericht enthält neben Vorschlägen zur Optimierung der theoretischen Fahrerlaubnisprüfung auch Anregungen zur ergänzenden Weiterentwicklung der praktischen Fahrerlaubnisprüfung.
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
This report gives an overview of pedestrian accidents on Japanese roads. Database used for the analysis is national traffic accident data based on police reports. Relevant measures and background information ranging from vehicle safety, engineering and education are briefly reviewed, and area for further improvement is discussed.rn
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
Portugal has the highest rate of road fatalities in Europe (2002 and for Eur-15 - CARE database). For this highest rate, the accidents involving pedestrians and motorcycle occupants have a higher contribution than the European average. In the last years, especially accidents involving motorcycles have been investigated and currently two different projects are being carried out, one related with motorcycles accidents and the other with pedestrian accidents. In these projects, countermeasures among others to reduce the fatalities between these two types of road users are being studied. These accidents are investigated with the commercial accident reconstruction software PCCRASH but also new methodologies based on multibody dynamics are in development in order to more accurately study these two types of accidents. In this paper, the methodologies in use for accident reconstruction and new methodologies in development are presented. Speeding his found to be one of the major causes of road fatalities for pedestrians and motorcycle occupants. In the case of motorcycle accidents, these involve mainly young drivers. Aspects as social behavior are also important to understand the causes of some of these accidents. Some examples of accidents occurring in Portugal, involving especially motorcycles and pedestrians are presented and discussed.
Road safety is a major preoccupation of the European Commission and the road transport industry and depends on numerous significant factors. In order to improve road safety and to plan effective safety improvement actions for truck transport, we must first identify the problems to be addressed, i.e. what are the main causes of truck accidents. The ETAC project, initiated by the European Commission and the IRU, was launched in order to set up a heavy goods vehicle accident causation study across European countries to identify future actions which could contribute to the improvement of road safety. The results will be based on a detailed analysis of truck accident data collected in seven European countries according to a common methodology which has been elaborated through numerous national and European projects. This paper describes the common methodology used to collect the information on the scene of the accident and to analyse the data so that the reconstruction of the crash events may be carried out. CEESAR proposes a methodology using its experience gained from over 10 years of accident data collection. This methodology is based on an in-depth investigation of the parameters involved in-an accident and linked to the driver, the vehicle, the road and their environment. In-depth investigation requires accident investigator presence on the scene of the accident in order to collect volatile information such as marks on the road, weather conditions, visibility, state and equipment of the vehicle, driver interview. Later, passive and active information is gathered, either at the hospital for the driver, at the garage for the vehicle or on the spot for the road geometry. A reconstruction carried out with the help of specific software and the analysis of the data collected and calculated enables the identification of the main causes of the accident and the future actions to plan in order to improve road safety as regards truck traffic.
Interaction of road environment, vehicle and human factors in the causation of pedestrian accidents
(2005)
The UK On-the-Spot project (OTS) completed over 1500 in-depth investigations of road accidents during 2000-2003 and is continuing for a further 3 years. Cases were sampled from two regions of England using rotating shifts to cover all days of the week and all hours of the day and night. Research teams were dispatched to accidents notified to police during the shifts; arrival time to the scene of the accident was generally less than 20 minutes. The methodology of OTS includes sophisticated systems for describing accident causation and the interaction of road, vehicle and human factors. The purpose of this paper is to describe and illustrate these systems by reference to pedestrian accidents. This type of analysis is intended to provide an insight into how and why pedestrian accidents occur in order to assist the development of effective road, vehicle and behavioural countermeasures.