81 Unfallstatistik
Due to recent years accident avoidance and crashworthiness on Austrian roads were mostly developed on national statistics and on-scene investigation respectively. Identification and elimination of black spots were main targets. In fact many fatal accidents do not occur on such black spots and black-spot investigation has reached a limit. New methods are required and therefore the Austrian Road Safety Programme was introduced by the Austrian Ministry of Transport, Innovation and Technology. The primary objective is the reduction of fatalities and severe injuries. Graz University of Technology initiated the project ZEDATU (Zentrale Datenbank tödlicher Unfälle) with the goal to identify similarities in different accident configurations. A matrix was established which categorizes risk and key factors of participating parties. Based on this information countermeasures were worked out.
NASS: the glass is half full
(2007)
The National Accident Sampling System (NASS) was born in the late 1970s. It was based on a substantial amount of experience and analysis of what was needed in the United States to understand the safety challenges of our highways. This work also showed how to collect high quality and useful crash data efficiently. Unfortunately, when Ronald Reagan - a President who believed in limited government - was elected, any hope of full funding for NASS was lost. The concept of 75 teams investigating about 18,000 serious crashes in detail annually was never realized. The system got up to 50 teams, then was cut to 36, and finally to 24 teams investigating fewer than a quarter of the originally anticipated number of crashes per year. Despite this, the NASS investigations provide a rich source of data, collected according to a sophisticated statistical sampling system to facilitate detailed national estimates of road casualties on our nation- highways and their causes. In addition, changes have been made in recent years to increase the number of more serious crashes of recent model vehicles to make the results more relevant to improving vehicle safety. A recent, detailed examination of hundreds of rollovers has provided considerable insight into rollover casualties and into what can be done to reduce them. Some of these results will be presented that show the value of the NASS system. Our experience with NASS and the Fatal Accident Reporting System (FARS) suggests a number of improvements that could be made in the United States" crash data systems. It also provides justification for a doubling or tripling of our national expenditures on crash data collection.
In the context of this study, different data sources for accident research were examined regarding their possible data access and evaluated concerning the individual quality and extent of the data. Analyses of accidents require detailed and comprehensive information in particular concerning vehicle damages, injury patterns and descriptions of the accident sequence. The police documentation supplies the basic accident statistics and is amended in the context of the forensic treatment by further information, e.g. by medical and technical appraisals and witness questionings. As a new approach to the data acquisition for the analysis of fatal traffic accidents, the information was made usable which was collected by the police and by the investigations of the public prosecutor. The best strategy for obtaining reliable, extensive and complete data consists of combining the information from these two sources: the very complete, but elementary statistic data of the Niedersächsisches Landesamt für Statistik (Lower Saxony State Authority of Statistics), based on the police documentation as well as the very extensive accident information resulting from the investigation documentation of the public prosecutor after conclusion of the procedure, the so-called Court Records. Of all 715 fatal traffic accidents, which happened in the year 2003 in the German State of Lower Saxony, 238 cases were selected by means of a statistically coincidental selective procedure based on a statistically representative manner (every third accident). These cases cover the investigation documents of the 11 responsible public prosecutor- offices, which were requested and evaluated while preserving the data security. Of the 238 cases 202 cases were available, which were individually coded and stored in a data base using 160 variables. Thus a data base of a sample of representative data for fatal accidents in Lower Saxony was set up. The data base contains extensive information concerning general accident data (35 variables), concerning road and road surface data (30 variables), concerning vehicle-specific data (68 variables) as well as concerning personal and injury data (27 variables).
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
Ziel dieses Forschungsvorhabens war es, das bisherige Gewichtungs- und Hochrechnungsverfahren für die örtlichen Unfallerhebungen in den Regionen Hannover und Dresden zu überprüfen und an die aktuellen Rahmenbedingungen anzupassen. Darüber hinaus sollten neue Möglichkeiten der gemeinsamen Hochrechnung von Ergebnissen aus beiden Erhebungsgebieten unter Berücksichtigung der aktuellen Datenlage, insbesondere in der amtlichen Unfallstatistik, untersucht und entsprechende statistische Verfahren entwickelt werden. Der Stichprobenplan der Erhebungen folgt einem zweistufigen Stichprobenverfahren. Tests mit einem zweistufigen Hochrechnungsverfahren der Hannover-Stichproben 2000 und 2001 auf die Gesamtheit Hannover haben jedoch ergeben, dass die theoretisch zu erwartenden Vorteile dieser zweistufigen Methode im Vergleich zur "einfachen Gewichtung" in der Praxis relativ gering sind. Unter Beibehaltung der bisherigen Gewichtungsprozedur (Anpassung an eine n-dimensionale Kontingenztabelle) wurden daher für die regionalen Hochrechnungen Dresden und Hannover alternative Methoden entwickelt, in der z.B. das Merkmal Ortslage durch die Unfallart ersetzt oder zusätzlich die Anzahl Unfallbeteiligter zur Gewichtung herangezogen wird. Leider erbringen diese Verfahren im Vergleich zur bisherigen (simultanen) Gewichtung nach Unfallschwere, Tageszeit und Ortslage nur wenige oder gar keine Verbesserungen der Anpassungsgenauigkeit bei Merkmalen der amtlichen Statistik, die nicht in die Gewichtung eingehen. Unabhängig vom Gewichtungsverfahren lässt die Abbildungsgenauigkeit bei einzelnen Variablen sehr zu wünschen übrig. Auf der Basis der Stichprobendaten 2000 wurde ferner noch ein Gewichtungsverfahren für Hochrechnungen auf das Bundesgebiet entwickelt und anhand der beiden Einzelstichproben sowie der gepoolten Stichprobe (Dresden plus Hannover) getestet. Die gepoolten Stichprobe zeigte die besten Ergebnisse. Allerdings ließen sich auch auf der Grundlage der gepoolten Daten nicht bei allen Merkmalen (gemeint sind hier Merkmale, die nicht Gewichtungsmerkmale sind) Verbesserungen des Fits erzielen. Es bleiben relativ große Abweichungen zwischen der gewichteten gepoolten Stichprobe und den bundesdeutschen Verteilungen. Es ist zu erwarten, dass auch bei vielen GIDAS Merkmale durch die Gewichtung keine essentielle Korrektur der Stichprobenverzerrungen erzielt werden kann. Insgesamt hat sich gezeigt, dass es auch mit alternativen, meist hierarchischen Gewichtungsverfahren nicht möglich ist, alle Merkmale, deren Verteilungen aus der amtlichen Statistik bekannt sind, mit hinreichender Genauigkeit an die Verhältnisse der Grundgesamtheit anzupassen. Es ist zu erwarten, dass sich dies bei den eigentlich hochzurechnenden originären GIDAS-Variablen ähnlich darstellt. Somit muss der Ansatz eines einheitlichen Verfahrens für alle Jahre und beide Erhebungsgebiete in Frage gestellt werden. Für besonders wichtige Fragestellungen sollte daher eine spezielle, auf das jeweilige Untersuchungsmerkmal abgestellte Gewichtung durchgeführt werden, wie dies exemplarisch am Beispiel der maximalen Kollisionsgeschwindigkeit gezeigt wurde. Schließlich werden im Bericht noch Empfehlungen zur Datenqualität und zu der Frage gegeben, wie sich das derzeit praktizierte Stichprobenverfahren im Hinblick auf die Gewinnung einer repräsentativen Stichprobe möglicherweise verbessern lässt.