81 Unfallstatistik
Filtern
Dokumenttyp
- Konferenzveröffentlichung (90) (entfernen)
Schlagworte
- Conference (86)
- Konferenz (86)
- Accident (59)
- Unfall (58)
- Statistics (37)
- Statistik (37)
- Germany (33)
- Deutschland (32)
- Injury (32)
- Fatality (31)
- Tödlicher Unfall (30)
- Verletzung (30)
- Data acquisition (27)
- Datenerfassung (27)
- Unfallrekonstruktion (26)
- Analyse (math) (23)
- Reconstruction (accid) (23)
- Analysis (math) (22)
- Schweregrad (Unfall, Verletzung) (21)
- Severity (accid, injury) (21)
- Datenbank (20)
- Untersuchung am Unfallort (16)
- Data bank (15)
- On the spot accident investigation (15)
- Ursache (15)
- Cause (14)
- Motorcyclist (14)
- Motorradfahrer (14)
- Schweregrad (Unfall (14)
- Fußgänger (13)
- Pedestrian (13)
- Severity (accid (13)
- Verletzung) (13)
- injury) (13)
- Car (12)
- Europa (11)
- Europe (11)
- Fahrzeug (11)
- Accident rate (10)
- Unfallverhütung (10)
- Vehicle (10)
- Accident prevention (9)
- Cyclist (9)
- Radfahrer (9)
- Safety (9)
- Sicherheit (9)
- Unfallhäufigkeit (9)
- Driver (8)
- Geschwindigkeit (8)
- Motorcycle (8)
- Motorrad (8)
- PKW (8)
- Risiko (8)
- Simulation (8)
- Collision (7)
- Fahrer (7)
- Method (7)
- Speed (7)
- Verfahren (7)
- Zusammenstoß (7)
- Active safety system (6)
- Insasse (6)
- Risk (6)
- Aktives Sicherheitssystem (5)
- Alte Leute (5)
- Bewertung (5)
- Database (5)
- Evaluation (assessment) (5)
- Old people (5)
- Rear end collision (5)
- Rechenmodell (5)
- Vehicle occupant (5)
- Analyse (Math) (4)
- Anfahrversuch (4)
- Auffahrunfall (4)
- Berechnung (4)
- Calculation (4)
- Crash helmet (4)
- Efficiency (4)
- Frontalzusammenstoß (4)
- Improvement (4)
- India (4)
- Indien (4)
- Mathematical model (4)
- Pkw (4)
- Portugal (4)
- Risikobewertung (4)
- Schutzhelm (4)
- Verbesserung (4)
- Verminderung (4)
- Accident reconstruction (3)
- Benutzung (3)
- Child (3)
- Decrease (3)
- Development (3)
- Driver assistance system (3)
- Entwicklung (3)
- Fahranfänger (3)
- Fahrerassistenzsystem (3)
- Head on collision (3)
- Hospital (3)
- Japan (3)
- Kind (3)
- Krankenhaus (3)
- Leistungsfähigkeit (allg) (3)
- Lorry (3)
- Overturning (veh) (3)
- Passive safety system (3)
- Passives Sicherheitssystem (3)
- Recently qualified driver (3)
- Risk assessment (3)
- USA (3)
- United Kingdom (3)
- Use (3)
- Vereinigtes Königreich (3)
- Verkehrsteilnehmer (3)
- Überschlagen (3)
- Adolescent (2)
- Australia (2)
- Australien (2)
- Belastung (2)
- Bicycle (2)
- Classification (2)
- Compatibility (2)
- Czech Republic (2)
- Deformation (2)
- EU (2)
- Education (2)
- Eindringung (2)
- Eingabedaten (2)
- Electronic stability program (2)
- Error (2)
- Erziehung (2)
- Fahrrad (2)
- Fehler (2)
- Head (2)
- Highway (2)
- Human factor (2)
- Impact test (2)
- Impact test (veh) (2)
- Information (2)
- Information documentation (2)
- Input data (2)
- International (2)
- Interview (2)
- Jugendlicher (2)
- Junction (2)
- Klassifizierung (2)
- Kleidung (2)
- Knotenpunkt (2)
- Kompatibilität (2)
- Kopf (2)
- Lkw (2)
- Load (2)
- Menschlicher Faktor (2)
- Modification (2)
- Overlapping (2)
- Penetration (2)
- Prevention (2)
- Road user (2)
- Seitlicher Zusammenstoß (2)
- Side impact (2)
- Software (2)
- Specifications (2)
- Standardisierung (2)
- Theorie (2)
- Theory (2)
- Trend (stat) (2)
- Tschechische Republik (2)
- Verformung (2)
- Veränderung (2)
- Zeitreihe (stat) (2)
- Überlappung (2)
- Abbiegen (1)
- Abstandsregeltempomat (1)
- Accident severity (1)
- Adaptive cruise controll (1)
- Administration (1)
- Age (1)
- Air bag (restraint system) (1)
- Airbag (1)
- Alter (1)
- Analyse (1)
- Attitude (psychol) (1)
- Auffharunfall (1)
- Ausrüstung (1)
- Austria (1)
- Batterie (1)
- Battery (1)
- Behaviour (1)
- Bein [menschl] (1)
- Bepflanzung (1)
- Brake (1)
- Braking (1)
- Bremse (1)
- Bremsung (1)
- Bus (1)
- Causes (1)
- China (1)
- Clothing (1)
- Coach (1)
- Coefficient of friction (1)
- Colthing (1)
- Cost (1)
- Cycle track (1)
- Decreases (1)
- Delivery vehicle (1)
- Deutschalnd (1)
- Driver training (1)
- Driving aptitude (1)
- Droge (1)
- Drugs (1)
- Drunkenness (1)
- Eins (1)
- Einstellung (psychol) (1)
- Electronic driving aid (1)
- Elektronische Fahrhilfe (1)
- Elektronisches Stabilitätsprogram (1)
- Elektronisches Stabilitätsprogramm (1)
- Equipment (1)
- Fahrausbildung (1)
- Fahrstabilität (1)
- Fahrtüchtigkeit (1)
- Fahrzeugteil (Sicherheit) (1)
- Fernverkehrsstraße (1)
- Financing (1)
- Finanzierung (1)
- Finite element method (1)
- Forecast (1)
- Forschungsarbeit (1)
- Fracture (bone) (1)
- France (1)
- Frankreich (1)
- Frequency (1)
- Front (1)
- Fuel tank (1)
- Geländefahrzeug (1)
- Geradeausverkehr (1)
- Gesetzesübertretung (1)
- Government (national) (1)
- Griffigkeit (1)
- Harmonisation (1)
- Hazard (1)
- Human body (1)
- Häufigkeit (1)
- Impact study (1)
- Intoxication (1)
- Jahreszeit (1)
- Knochenbruch (1)
- Kontrolle (1)
- Korea (Süd) (1)
- Kosten (1)
- Kraftstofftank (1)
- LKW (1)
- Leg (human) (1)
- Leistungsfähigkeit (Allg.) (1)
- Lieferfahrzeug (1)
- Location (1)
- Main road (1)
- Man (1)
- Mann (1)
- Mathematical Model (1)
- Measurement (1)
- Medical aspects (1)
- Medizinische Gesichtspunkte (1)
- Menschlicher Körper (1)
- Messung (1)
- Methode der finiten Elemente (1)
- Mobility (1)
- Mobilität (1)
- Motorisierungsgrad (1)
- Netherlands (1)
- Niederlande (1)
- Norway (1)
- Norwegen (1)
- Nutzwertanalyse (1)
- Oberflächentextur (1)
- Occupant (veh) (1)
- Offence (1)
- On the spot investigation (1)
- One (1)
- Ort (Position) (1)
- Partnerschaft (1)
- Partnership (1)
- Passenger (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Public transport (1)
- QAccident (1)
- Quality (1)
- Quality assurance (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radweg (1)
- Rail bound transport (1)
- Rail traffic (1)
- Reconstruction [accid] (1)
- Regierung (staat) (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Reibungsbeiwert (1)
- Reisebus (1)
- Republic of Korea (1)
- Research project (1)
- Residential area (1)
- Richtlinie (1)
- Richtlinien (1)
- Road traffic (1)
- Road transport (1)
- Rsk (1)
- Safety belt (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schweden (1)
- Schweiz (1)
- Schätzung (1)
- Season (1)
- Sicherheitsgurt (1)
- Significance (1)
- Signifikanz (1)
- Skidding resistance (1)
- Speed) (1)
- Spinal column (1)
- Sport utility vehicle (1)
- Standardization (1)
- Steifigkeit (1)
- Stiffness (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straße (1)
- Straßentransport (1)
- Straßenverkehr (1)
- Surface texture (1)
- Surveillance (1)
- Switzerland (1)
- Technologie (1)
- Technology (1)
- Telematics (1)
- Telematik (1)
- Test (1)
- Thailand (1)
- Traffic (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Trunkenheit (1)
- Turn (1)
- Underride prevention (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallverhütug (1)
- United kingdom (1)
- Unterfahrschutz (1)
- Value analysis (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vegetation (1)
- Vehicle handling (1)
- Vehicle ownership (1)
- Vehicle safety device (1)
- Veletzung) (1)
- Vereinigtes Königreichl (1)
- Verhalten (1)
- Verkehr (1)
- Verkehrsinfrastruktur (1)
- Versuch (1)
- Verwaltung (1)
- Vorn (1)
- Weather (1)
- Wirbelsäule (1)
- Wirksamkeitsuntersuchung (1)
- Witterung (1)
- Wohngebiet (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- tödlicher Unfall (1)
- Öffentlicher Verkehr (1)
- Österreich (1)
Institut
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
Traffic accidents were ranked the third among the major causes of death in Thailand. About 13,438 deaths and the death rate from traffic accident was 21.5 per 100,000 of population in 2002. The deaths and death rate varied upon the economic situation. After the economic crisis, traffic accidents were increased as well as the period of the bubble economy. In the Central region of Thailand numbers of road traffic crashes were lower than Bangkok Metropolis, but the highest in the number of deaths, death rate and serious injuries in 2002. Men aged 15"29 years old had higher numbers of deaths than men in other age groups and higher than women. Deaths and injuries from road traffic crashes were the highest in April and January, because there was a long weekend in those months. About 80 percent of road traffic crashes were caused by private car and motorcycle. In 2000 about 51 percent of traffic accidents took place on the straight way, followed by the junction and curves. In 2002, about 97 percent of road traffic crashes were caused by human factors including improper passing, speeding and disregarding to traffic signal, however, the identification of causes of traffic accident needed to improve. Drunk driving, disregarding on safety equipment usage, inefficiency of law enforcement and discontinuing of road safety programs were the deepest causes of traffic accidents. Research based information, a broad coalition of stakeholder and urban planning policy were needed to incorporate for a comprehensive road safety policy formulation and actions.
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.
Portugal has the highest rate of road fatalities in Europe (2002 and for Eur-15 - CARE database). For this highest rate, the accidents involving pedestrians and motorcycle occupants have a higher contribution than the European average. In the last years, especially accidents involving motorcycles have been investigated and currently two different projects are being carried out, one related with motorcycles accidents and the other with pedestrian accidents. In these projects, countermeasures among others to reduce the fatalities between these two types of road users are being studied. These accidents are investigated with the commercial accident reconstruction software PCCRASH but also new methodologies based on multibody dynamics are in development in order to more accurately study these two types of accidents. In this paper, the methodologies in use for accident reconstruction and new methodologies in development are presented. Speeding his found to be one of the major causes of road fatalities for pedestrians and motorcycle occupants. In the case of motorcycle accidents, these involve mainly young drivers. Aspects as social behavior are also important to understand the causes of some of these accidents. Some examples of accidents occurring in Portugal, involving especially motorcycles and pedestrians are presented and discussed.
Accidents involving two wheels vehicles represent one of the more important types of accidents in Europe. These accidents are usually not easy to reconstruct specially for the analysis of the injuries and its correlation with accident dynamics and evidences. Different methodologies are applied in this work for the reconstruction of two wheeler accidents, especially accident involving motorcycles. From the typologies of road evidences like skid marks, to the use of Pc-Crash and the use of Madymo models, different reconstruction of real accidents are presented. One of the questions that sometimes arise for legal purposes when some type of head injuries arise is if the occupant was wearing or not a helmet. The correlation of head injuries with the use of the helmet is a very important issue, therefore an important legal aspect. One of the key questions for the reconstructions that is difficult to analyze, is if the vehicle occupant, was or not, wearing the helmet. Based on the previously collected information, a generic model of a helmet was developed on CAD 3D, followed by its conversion into finite elements, all in order to perform impact tests using the Madymo software that would help improve the helmet- safety, but that also can be used as a tool in accident reconstruction.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
One of the major problems of road safety in Europe is the powered two wheelers accidents. One of the European countries with one of the highest rates is Portugal where in 2006, mopeds and motorcycles fatalities represented 27% of all road users deaths. In this work, a deep analysis and overview of the current state of mopeds and motorcycles accidents for the 2004-2006 period is presented. Within this period 830 PTW occupants die, 2958 have been severely injured and 25000 suffer slight injuries. A detailed analysis of the conditions of these accidents has been carried out, using the data of the national accident database. This analysis provides global information, about geographic environmental conditions, driver- characteristics among others. From this data detailed information is obtained allowing to know when, where and who. In order to answer the question why more a widely collection of data has been collect for 70 accidents. The data has been collected using OECD methodology. For these accidents a detailed reconstruction has been carried out, what is especially important for fatal accidents where for instance speed in an important factor. From these collection and analysis of data a wider overview of facts and measures are extracted. Among them, some are emphasized such as that the quality and non-use of helmets plays an important role in severe and fatal accidents especially for accidents involving moped vehicles, or speed is the most important factor in fatal accidents involving motorcycles. Concerning motorcycle accident reconstruction, different tools can be used depending of the accident scenario and complexity. For simple cases, with specific characteristics, analytical formulation based in vehicle crash dynamics can be use in order to determine the impact speed of the vehicles impact, analysing the skid marks, deformations, victims rest position and considering parameters (EES, vehicle deceleration, etc). Aspects such as the energy absorption capability of motorcycles are also discussed. In the general cases the accident reconstruction software Pc-Crash has been used for the reconstruction of the accident. In very complex cases, has for instance the impact between motorcyclist and barriers, Madymo software is used especially to determine speed from injuries. An example of the impact of a motorcyclist and a motorcyclist-friendly barrier is present to illustrate the benefits and limitations of such systems.
A set of recommendations for pan-European transparent and independent road accident investigations has been developed by the SafetyNet project. The aim of these recommendations is to pave the way for future EU scale accident investigation activities by setting out the necessary steps for establishing safety oriented road accident investigations in Member States. This can be seen as the start of the process for establishing road accident investigations throughout Europe which operate according to a common methodology. The recommendations propose a European Safety Oriented Road Accident Investigation Programme which sets out the procedures that need to be put in place to investigate a sample of every day road accidents. They address four sets of issues; institutional addressing the characteristics of the programme; operational describing the conditions under which data isrncollected; data storage and protection; and reports, countermeasures and the dissemination of data.rn
The SafetyNet project was formulated in part to address the need for safety oriented European road accident data. One of the main tasks included within the project was the development of a methodology for better understanding of accident causation together with the development of an associated database involving data obtained from on-scene or "nearly onscene" accident investigations. Information from these investigations was complemented by data from follow-up interviews with crash participants to determine critical events and contributory factors to the accident occurrence. A method for classification of accident contributing factors, known as DREAM 3.0, was developed and tested in conjunction with the SafetyNet activities. Collection of data and case analysis for some 1 000 individual crashes have recently been completed and inserted into the database and therefore aggregation analyses of the data are now being undertaken. This paper describes the methodology development, an overview of the database and the initial aggregation analyses.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
A national initiative from the vehicle manufacturers, safety system suppliers, the road administration and universities in Sweden took off in 2007. The aim was to develop a national investigation network and a methodology focusing on all phases of a crash (pre-crash, in-crash and post-crash) as well as all parts of the road transport system (road user, vehicle and road environment). The initiative is formally run as a project with the acronym INTACT (Investigation Network and Accident Collection Techniques). It was a three year pilot with the aim to develop methodologies for an extended national crash investigation activity. During the first year the INTACT partners agreed on the aim for the investigation and methods for retrieving the data were developed. During the second and third year the methodology was tested in real-world investigations and further refinement was made. The paper describes the methodology developed to obtain high qualitative in-depth road crash data.
India is one of the leading countries reporting highest road accidents & related injuries. TMARG (Tata Motors Accident Research Group) has been recording crashes in association with M/s. Lokamanya Medical Foundation since 2011 with M/s, Amandeep Hospitals since Aug 2013. This study has highlighted some accident types not discussed extensively in literature. Trucks to Truck impacts " Cabin interaction with overhanging loadbody structures and Offset underside impacts for passenger vehicles are seen in significant numbers. The paper discusses these in more detail including severity.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.