81 Unfallstatistik
Filtern
Dokumenttyp
- Konferenzveröffentlichung (5)
- Buch (Monographie) (1)
- Bericht (1)
Schlagworte
- Rechenmodell (7) (entfernen)
Untersuchungsgegenstand des Forschungsprojektes war die Überprüfung der aktuellen Grenzwertkriterien in Deutschland zur Identifizierung von Unfallhäufungen im Straßennetz. Nach Analyse des IST-Zustandes und der Bestimmung von Defiziten wurden alternative Grenzwertkriterien mit dem Ziel eines optimierten Einsatzes von Ressourcen im Bereich der Örtlichen Unfalluntersuchung überprüft. Auf Grundlage dieser Erkenntnisse erfolgte die Ableitung von Empfehlungen für zukünftige Grenzwertkriterien. Insgesamt wurden verschiedene Grenzwertkriterien getrennt für die Ortslagen innerorts, außerorts (ohne BAB) und Bundesautobahnen mittels einer umfangreichen Unfalldatenauswertung untersucht. Als Untersuchungsgebiete dienten außerorts Bereiche von Bundesländern (Sachsen) oder ganze Bundesländer (Bayern, Rheinland-Pfalz) sowie innerorts Städte verschiedener Größe (Großstädte über 100.000 E, Mittelstädte mit 30.000 bis 100.000 E sowie Durchfahrten von Ortschaften unter 30.000 E) aus vier Bundesländern. Die Untersuchungen lassen sich in folgenden Ergebnissen zusammenfassen:- Bei der Bestimmung der unfallauffälligen Stellen (UAS) mit gleichartigen Unfällen werden ortslagenunabhängig nahezu alle UAS durch die Gleichartigkeit des Unfalltyps identifiziert. Durch die Berücksichtigung von Unfallumständen wie z.B. die Verkehrsbeteiligung werden kaum zusätzliche Stellen erkannt. - Bei der parallelen Betrachtung der drei aktuellen Auswertungszeiträume (1-Jahreskarte, 3-Jahreskarte (P) und 3-Jahreskarte (SP)) wurde festgestellt, dass ein Großteil der UAS, die in der 3-Jahreskarte (SP) auffällig sind, auch in der 3-Jahreskarte (P) als auffällig identifiziert werden. - Die zeitliche Stabilität, d.h. das wiederholte Auftreten eines unfallauffälligen Bereiches in zwei oder mehr aufeinanderfolgenden Betrachtungszeiträumen, erreicht gemessen am Anteil an allen unfallauffälligen Bereichen in einem Ausgangszeitraum weder bei den UAS noch bei den unfallauffälligen Linien (UAL) eine zufriedenstellende Größenordnung. - Aus den unterschiedlichen Kriterien für die Optimierung von Grenzwerten nach einem ausgewogenen Verhältnis von Aufwand und Nutzen resultieren zum Teil unterschiedliche Ergebnisse. Bei der Empfehlung neuer Grenzwerte wurde darauf geachtet, dass bei Anwendung des Grenzwertes mindestens 10% des Gesamtunfallgeschehens im jeweiligen Betrachtungszeitraum bearbeitet werden. Die Empfehlungen beinhalten für die Identifizierung von unauffälligen Bereichen insbesondere Vorschläge zu geeigneten Betrachtungszeiträumen, räumlichen Abgrenzungen von unfallauffälligen Bereichen sowie der Angabe optimierter Grenzwerte differenziert nach Ortslage und Betrachtungszeitraum.
The declining trend since 1991 in the number of killed people was broken in 2011 when overall 4 009 people died in traffic accidents in Germany. The question arises if there is a stagnating trend of fatalities in Germany in future? By breaking down the accidents with casualties towards a monthly view one can see a decreasing trend of fatalities in the warmer months especially since 2009. When comparing against winter months higher deviations are observed. In December 2011 an increase of 191 traffic deaths were registered (181 in 2010 compared to 372 in 2011). Further analyses of different accident influences were evaluated and their possibility of drastic change from one year to the other was determined. As seen weather- and environmental conditions are one of the major contributing factors and are one of the causes for the increased number of fatalities. To support the underlying assumption a model had been created to calculate the number of traffic deaths on a daily basis approach. As an input, road conditions projected through weather parameters and also different driving behaviors on weekdays or holidays were used. As a result, estimates of daily fatality with up to 75% precision can be achieved out of the 2009, 2010 and 2011 data. Further on it shows that weather and street conditions have a high influence on the overall resulting number of traffic accidents with casualties, and especially to the number of fatalities. Hence it is estimated that approximately 3 300 people were killed in traffic accidents in Germany in 2013 which would be again a reduction of another 13% compared to 2012. Therefore an answer to the question will be that the decreasing trend in traffic fatalities in Germany somehow is not broken when environmental conditions are included in national statistics. Their effects will become more visible in future accident statistics and it is estimated variances of 5% to 8% of the annual number of traffic fatalities in Germany will be seen.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
One goal of the assessment of the crashworthiness of passenger cars is to characterize the potential of injury outcome to occupants of cars involved in an accident. This can be achieved by the help of an index that puts the number of injured occupants of passenger cars in relation to the number of cars involved in an accident. As a consequence, this index decreases with a lower potential of injury and rises with a higher number of injuries while assuming a fixed number of accidents. Another index is introduced that uses an economical weighting of each injury level. The consequential injury costs are calculated using the average economical costs for lightly, severely and fatally injured persons. The calculation of the safety indices is based on an anonymized sample of accident data provided by the Federal Statistical Office. An index of Mercedes passenger car drivers depending on the year of registration between 1991 and 2006 is compared to the index of drivers of cars of other makes within the same range of registration years.
Automotive Engineering, Mechanical Engineering and TechnologyrnAbstract: The degrees of injury severity, as a rule injuries scaled by AIS of specific regions of the human body, investigated out of road traffic accidents correspond to the body-specific loading values, which are found out with the aid of experimental or mathematical simulation of crash tests with motor vehicles or with sled tests. The coherence between the injured human being on the one hand and the physical and the theoretical model respectively on the other hand is established by the risk function, which describes the probability of degrees of injury severity in dependence on the protection criteria. Due to the different physical characteristics in the simulation, e.g. accelerations, forces, compressions and their velocity, the compilation of these quantities, comparable to the MAIS, the maximal occurred single AIS obtained in accident analysis is much more difficult in the simulation than in the accident occurrence. Therefore it is obvious to normalize the loading values gained out of simulation and to summarise them to an entire value in a suitable manner, the safety index.rn
Die volkswirtschaftlichen Kosten, die durch Straßenverkehrsunfälle entstehen, umfassen die Personenschadens- und Sachschadenskosten. Diese Kosten werden jährlich durch die Bundesanstalt für Straßenwesen ermittelt. Grundlage für diese Berechnung ist ein Rechenmodell aus dem Jahre 1996. Seit dieser Zeit sind deutliche Veränderungen eingetreten. Die Änderungen betreffen die Unfallzahlen und die Unfallschwere, die Kosten des Gesundheitssystems zur Wiederherstellung, die Einkommensverhältnisse und damit die wirtschaftlichen Verluste von Unfällen sowie der Wissensstand zur Bewertung der Unfallschäden. Die Fortschreibung der volkswirtschaftlichen Kosten durch Straßenverkehrsunfälle erfordert somit eine Überprüfung und Aktualisierung des Rechenverfahrens. Im Auftrag der Bundesanstalt für Straßenwesen wurden daher im Rahmen des Forschungsprojektes "Volkswirtschaftliche Kosten durch Straßenverkehrsunfälle in Deutschland" die Kosten der Personen- und Sachschäden neu ermittelt. Im Rahmen des Projektes erfolgte eine Überprüfung und Aktualisierung sämtlicher Rechenmodelle für die einzelnen Kostenkomponenten. Beispielsweise wurde der polizeiliche Bearbeitungsaufwand für einen Unfall auf Basis von Angaben der Landesinnenministerien neu ermittelt und die Rechtsprechungskosten wurden auf Grundlage der Rechtschutzstatistiken des Statistischen Bundesamtes neu bewertet. Für die Berechnung der Unfallkosten wurden zudem die Eingangsdaten, zum Beispiel über die Kosten und die Dauer der medizinischen Behandlung, bei Versicherern vollständig neu erhoben. Zusätzlich zu den bisher vorgenommenen Bewertungen wurden unfallbedingte Zeitverluste auf Bundesautobahnen abgeschätzt und monetär bewertet. Eine Untersuchung der Kosten schwerstverletzter Unfallopfer erfolgte getrennt. Die neu berechneten Unfallkosten betragen im Jahr 2005 annähernd 31.477 Mrd. Euro Die Personenschäden hatten daran einen Anteil von 15.226 Mrd. Euro die übrigen 16.252 Mrd. Euro entfielen auf die Sachschäden.